The difference between DSP control handle and NC-Studio
DSP control system don't need connect to PC.It included three parts, control card, U
disk,and handle ControllerWhen you set the toolpath by the software(Artcam ,Type3,etc),then copy it to U disk,
then insert U disk to controlcard ,the toolpath will show in the hand controller.
You can control the tool cut or engrave.
DSP is easily operate and learned,especially for the freshman.But it can’t show the
whole Manufacturing process .
In order to see the toolpath and tool position on the PC screen pretty when setting up a
job,i recommend to you the Nc-studio control system.
The whole NC control system include one control card install into control box,and
one disk,need to install in your PC.Then control the whole machine move (include X
axis move left and right,Y axis move back and forth ,Z axis move up and down ).
If you want to leave the PC far,i recommend to you the DSP,but if you see all the job
process ,Nc is best option.
NK105:
Now we have upgrade our DSP control system,NK105 response more quickly than
the common RZ0501.It widely used interactive control system with friendly operate
interface,now is more popular in the market.