CNC Router Care & Maintenance
Whether you are a novice or a professional, you should do regular care and maintenance for 48"x96" CNC wood router kit and its accessories.
• The control cabinet should be placed in a well-ventilated place and cannot be placed in a high-temperature environment. Prevent the electrical components in the control box from malfunctioning due to high temperature.
• The machine should be placed in a dry and well-ventilated place (to prevent parts and accessories from malfunctioning due to exposure to the fuselage).
• The machine must be equipped with a reliable voltage stabilizer to ensure the safe grounding of the ground wire. At this point, the manufacturer has basically installed and debugged the customer in advance when configuring the control cabinet. It is best to consult before purchasing the machine.
• Try not to use the internet computer to transfer files to the machine. Computers connected to the network are likely to cause abnormalities in the machine through file transfer.
• The machine needs to be maintained every other month (add a proper amount of special lubricating oil to the screw rod and the guide rail rack). Now many manufacturers are equipped with manual or electric lubricators, which can realize faster feeding of the slider and the wire. The bar is filled with oil and does not need to be disassembled, making maintenance easier and faster.
• Maintain a good lubrication state, regularly check and clean the lead screw, add or replace lubricating grease and oil, so that the lead screw, nut and other moving parts always maintain a good lubrication condition to reduce the wear speed of mechanical parts.
• Do not allow the machine to work on the same part of the table for a long time (in case that the screw, guide rail and other transmission devices are not in contact with the beam for a long time and cannot be reasonably lubricated).
• Check whether the wiring and screws of the machine are loose within a certain period of time. It is best to tighten the screws regularly. This can also improve the accuracy of routing.
• Do not place debris (magnetic materials, corrosive items, overw8 items, liquids) on the table or machine head.
