CO2 laser cutting machine is a gas laser marking machine. Because the main gas filled in the laser tube is CO2, this laser tube is called CO2 laser tube, and the laser cutting machine using this laser tube is called CO2 laser cutting machine. The world's first CO2 laser cutting machine was born in the 1970s. Over the past 30 years, due to the continuous expansion of application fields, CO2 laser cutting machines have been continuously improved.
From the perspective of existing laser technology, the laser cutting equipment with the highest cutting thickness is none other than CO2 laser cutting machine. CO2 laser cutting machine is particularly suitable for the following products:
Metal sheet metal parts that are not suitable for mold manufacturing, especially metal sheet metal parts with complex contours and small batches,
Cutting non-metallic materials such as advertising industry, clothing industry, furniture and crafts industry. Ordinary carbon dioxide laser cutting machines are sufficient to meet your needs, so CO2 laser cutting machines can be used for patterns, marks, and fonts of stainless steel or non-metallic materials used in decoration, advertising, and service industries.
The co2 laser cutting machine uses a focusing lens to focus the laser beam on the surface of the material to melt the material, and uses a cutting gas coaxial with the laser beam to blow away the melted material, and makes the laser beam and the material move relative to each other along a certain trajectory, thereby forming a slit of a certain shape. The co2 laser cutting machine is most suitable for cutting low-carbon steel with a thickness of <12mm, stainless steel with a thickness of <6mm, and aluminum plate with a thickness of <4mm. It can cut a uniform slit of <0.3mm width on the alloy steel pipe with a wall thickness of 6~9mm, and the diameter of the small hole at the cutting hole cannot be >0.3mm. In the cutting of oil sieve pipes, in order to prevent sediment from entering the oil pump, a uniform slit of <0.3mm width is cut on the alloy steel pipe with a wall thickness of 6~9mm, and the diameter of the small hole at the starting point of the cutting hole cannot be >0.3mm. Therefore, only the CO2 laser cutting machine can be selected.