Metal material is an important product in the manufacturing industry, to make full use of this material, you need to use metal forming equipment cutting and forming, and metal laser cutting machine is an important mechanical equipment in the metal forming industry. Compared with other types of cutting machines, metal laser cutting machines are favored in the manufacturing industry because of their high degree of automation, wide range of application, high cutting efficiency and high cutting accuracy. So, let's take a look at the operation of the metal laser cutting machine.
Metal laser cutting machine as a metal cutting tool, to give full play to its work efficiency, you need to master its working principle and operating steps. Briefly introduce the method of operating metal laser cutting machine.
The working principle of the laser cutting machine is simple and clear. The laser cutting machine uses a focused high-power, high-energy density laser beam to irradiate the workpiece, so that the irradiated material quickly melts, vaporizes, ablates or reaches the ignition point, and at the same time blows away the molten material with a high-pressure high-speed airflow coaxial with the beam
The following steps are usually required to operate a metal laser cutter.
1. Open all parts of the working circuit, including the general power switch, ballast, fiber laser power switch and compressor, air circuit valve, dryer, etc., to ensure that the power supply system of each part is normal;
2. Test, confirm that the machine runs smoothly, each limit and emergency button is firm;
3. Place the metal material to be cut on the cutting table of the machine tool smoothly. At the same time, operate the computer screen of the console, input parameters such as the thickness of the product material, and import the pattern into the machine;
4. Control the action of each axis through the menu function to adjust the cutting position to the appropriate part of the plate;
5. Use the arrow keys on the panel to adjust the cutting head to a proper cutting focus position
6. Start the laser and machine tool, and the equipment automatically starts cutting according to the input parameters and modes;
7. Staff must be present during the cutting process. When an emergency situation needs to be handled quickly, press the emergency stop button;
8. After the cutting work, pay attention to check the cutting accuracy and quality of the first batch of samples.
When operating the metal laser cutting machine, in addition to strictly operating according to the operating procedures, but also wear personal protection, such as close to the laser beam, wear a protective mirror that meets the requirements to avoid unnecessary risks. As a beginner, please be sure to refer to all relevant instructions, or through expert training on the job, do not forget to use at will, mess with.
The above is the operation method of the metal laser cutting machine. For more information, please feel free to contact us! Our company has many years of experience in the production of equipment to meet customer needs, if you have any questions, you can feel free to contact us, always look forward to your joining.