Plasma cutting machine maintenance
1. Use the equipment correctly
CNC plasma cutting machines play an important role in preventive maintenance, which can reduce equipment failures and extend service life when used properly. According to statistics from the Office of Internal Oversight, one-third of failures are caused by human factors and general maintenance (such as oiling, cleaning, inspection, etc.) is performed by the operator. The solution is: attach importance to improving the awareness of equipment management, operation and maintenance, strengthen operation and technical training, improve the quality of operators, enable them to master equipment performance as soon as possible-tools, strictly implement equipment operation and maintenance rules, and ensure
2. Daily inspection by operators
The operator is the direct user of the CNC plasma cutting machine. To ensure the normal operation of the CNC cutting machine, the CNC operator needs to perform the following tasks every day: check whether all protective plates, housings and doors are operating properly, walk along each axis throughout the whole process, observe whether the operation is smooth, ensure that the limiters of all axes are working properly and adapt to the corresponding limiter positions, check whether there are scratches or signs of wear on the guide rails, check whether the guide rail cleaners are damaged, and whether the guide rails should be touched in order to
3. Roaming control equipment
According to the advanced, complex and high-intelligence characteristics of CNC plasma cutting machines, repair and maintenance are much more complicated and demanding than ordinary equipment. Maintenance personnel should actively prevent faults and accidents through regular mobile inspections, such as the operation of the exhaust fan of the CNC system, the heat of the cabinet, the presence of abnormal noise or foreign odors in the motor, the indication of the pressure gauge, leakage, good lubrication conditions of all pipelines, etc. If abnormal phenomena are found, they can be eliminated in an embryonic state to reduce all avoidable losses.