Daily laser maintenance
1. Before starting up, perform routine maintenance on the laser to ensure stable laser performance;
2. Check the cooling water pressure to ensure that the cooling water pressure is stable;
3. Check the cooling water temperature to ensure that the water temperature is within the appropriate range for the laser;
4. Check the oil level in the laser vacuum pump. If it is not enough, add oil;
5. Check whether there is leakage in the laser oil, water and gas circuits.
Maintaining optical lenses
1. Do not touch the surface of optical lenses (reflectors, focusing lenses, etc.) directly with your hands to avoid scratching the mirror surface. If there is oil stains or dust on the mirror surface, the lens should be cleaned in time;
2. Do not place the lens in a dark and humid place, as this will cause the lens surface to age.
3. The lens surface is stained with dust, dirt, or water vapor, which can easily absorb laser light and cause damage to the lens coating; at least it will affect the quality of the laser beam, and at worst it will cause no laser beam to be produced.
4. When the lens is damaged, you should contact the Jinweike after-sales service department for repair in time. Try not to use the damaged lens, otherwise it will accelerate the damage of the repairable lens.
5. When installing or replacing the reflector or focusing lens, do not use too much pressure, otherwise it will cause the lens to deform, thus affecting the quality of the beam.