When many woodworking engraving machines are processed, the depth of the process is designed according to the drawings made in advance. For example, the knife needs to be 0.5cm, and the actual engraving depth is 0.5. But when a problem occurs, it is found that when it should be 0.5, some places are 0.2, and some places are even 1. This is a headache.
If you find a problem and want to solve it, you must first understand where the problem occurred. Generally, if the woodworking engraving machine engraves unevenly, it is generally due to problems in the following aspects:
1. The control card is loose or faulty
2. Stepper motor failure
3. Driver failure or current subdivision is inconsistent with software settings
4. Z-axis motor line failure
5. Spindle motor failure
6. Inverter interference or incorrect data setting
7. Static interference
8. Computer virus or system problem
When a woodworking engraving machine has this kind of failure, the better solution is to check it out. Eliminate most of them according to the actual situation, and then check them one by one. Of course, if there are problems with the driver, motor, inverter, etc., it is better to ask the manufacturer to solve them.