How to maintain and service the edge banding machine during daily use?

1. Regular lubrication: Lubricate the bearings of each component of the edge banding machine with lubricating oil, and be sure to choose the appropriate lubricating oil, otherwise it will affect the normal use of the edge banding machine.
2. Regular inspection: Regularly inspect and maintain the fully automatic edge banding machine. During the maintenance process, carefully check the wear of parts such as gears and bearings, and replace the seriously worn parts in time. Once found, tighten them immediately, and replace the screws if necessary.
3. Timely cleaning: Clean the wood chips and various debris generated during the production process to prevent the accumulation of the above waste from causing the machine to jam and affect the normal use of the machine. Secondly, clean some stains on the surface of the machine in time to keep the edge banding machine clean and tidy, and prevent harmful substances from corroding and damaging the surface of the machine.
4. Timely removal: Remove waste around the edge banding machine and keep the operating area clean.
5. The amount of glue applied and the temperature of use should be adjusted accordingly according to the thickness, width and size of the workpiece, as well as the heating capacity of the edge banding machine itself.
6. Clean the glue pot regularly: Prevent long-term high-temperature heating from forming carbon deposits, which will affect the normal heating effect of the equipment.
7. The glue return port should be kept unobstructed: otherwise the lower mouth of the workpiece will be very dirty, thus affecting the quality. At the same time, the glue will also adhere to the conveyor belt and the travel switch, causing the travel switch to malfunction and damage the workpiece and equipment.