Home > Knowledge > Content
How to use and maintain fiber laser cutting machine?
- Jun 07, 2018 -

How to use and maintain fiber laser cutting machine? When using fiber laser cutting machines to process objects, it is necessary to learn the use and maintenance skills of fiber laser cutting machines in order to better utilize the effectiveness of the equipment and maximize the efficiency of the equipment.
How to use and maintain the fiber laser cutting machine:
1) Always check the strip and make sure it is tight. Otherwise, if there is a problem during the operation, it may injure people, and it can also lead to death. The steel strip looks like a small thing, and the problem is a bit serious.
2) Check the straightness of the track and the verticality of the machine every six months and find that it is not normal to maintain and debug in time. Without this, it is possible that the effect of cutting out is not very good, and the error will increase, affecting the cutting quality. This is a top priority and must be done.
3) Once a week, use a vacuum cleaner to aspirate dust and dirt from the machine, and all electrical cabinets should be tightly sealed against dust.
4) The guide rails should be cleaned regularly to eliminate dust and other debris, ensure that the normal rack of the equipment should be wiped regularly, add lubricating oil, and ensure lubrication without debris. The guide rails must be cleaned and lubricated frequently, and the motor must be cleaned and lubricated on a regular basis. The machine will be able to walk in the better position. More accurate cutting will improve the quality of cut products. .
5) The double-focus laser cutting head is a fragile item on the laser cutting machine, and it is used for a long time, resulting in damage of the laser cutting head.
Fiber laser cutting machines require regular inspection and maintenance. If deformation or other forms appear, you should know at this time that the laser cutting head is a little damaged and it needs to be replaced. Failure to replace will affect the quality of cuts, increase costs, and some products may require secondary processing to reduce production efficiency. The laser cutting heads are to be found by the Fahrenheit laboratories. They should be carefully checked when they are purchased to avoid problems when they are used.

Copyright © Jinan Unistar Machinery Co.,Ltd. All Rights Reserved.